| |
|
|
Experience fine gold recovery, in a lighter and more compact dredge that will out perform any double or triple sluice on the market! Extremely easy to operate, quick and easy clean up. Provides quick identification of values in the primary recovery riffle section. Rolled top edges provide greater safety and strength. Heavy duty latches and a longer rubber damper for more even distribution. Currently available. See page 5 for more details
| Sluice Model | Dredge Size | Length | Width | Net Weight | Shipping Weight | Dredge Series | |
| SB4F3 | 4" | 48" | 16" | 34 lbs. | 42 lbs. | 4500/4505 | $450.00 |
| SB5F3 | 5" | 60" | 20" | 53 lbs. | 61 lbs. | 5000/6000 | $550.00 |
| SB6S | 6" | 112" | 26" | 210 lbs. | 240 lbs. | 6200 | $1495.00 |
| SB8S | 8" | 112" | 28" | 231 lbs. | 246 lbs. | 8200 | $1595.00 |
| SB8 | 8" | 162" | 32" | 250 lbs. | 275 lbs. | 8065 | $1995.00 |
Jet Flare Sluice Box has been modified with rolled top edges for greater strength and heavy duty latches that are made lighter for portability. Includes a large classifying screen that covers nearly half of the riffle section. Equipped with rubber ribbed matting providing quick identification of values. "Miners Moss" is also included for superior fine gold recovery and wire mesh screen over ribbed carpet, provides superb fine gold recovery.
| Sluice Model | Dredge Size | Length | Width | Net Weight | Shipping Weight | Dredge Series | |
| SB2F | 2" | 36" | 10" | 11 lbs. | 13 lbs | 2000 | $145.00 |
| SB25 | 2.5" | 48" | 10" | 15 lbs. | 20lbs. | 2500 | $170.00 |
| SB3F | 3" | 48" | 14" | 20 lbs. | 30 lbs. | 3600/3605 | $199.00 |
Convert your 97 model "Jet Flare Sluice Box" into an improved fine gold recovery system with a double sluice conversion kit. Increase your sluicing capacity and classify to 3/16 of an inch. This is available only in a single 3", 4", 5" and 6 inch "Jet Flare Sluice", to accommodate the Drop Box Kit. To insure the compatibility to the drop box kit, make sure that jet flare sluice is the newer model and has the rolled top edges.
| Kit Part Number | Sluice Box | Length | Net Width | Shipping Weight | Applicable Dredge | ||
| SBCKF3 | SB3F | 48" | 14 ". | 19 lbs. | 24 lbs. | 3000 | $125.00 |
| SBCKF4 | SB4F | 48" | 16" | 20 lbs. | 25 lbs. | 4000 | $135.00 |
| SBCKF5 | SB5F | 60" | 20" | 24 lbs. | 30 lbs. | 5000 | $150.00 |
The new "Jet Flare" increases suction power, reduces the chances of rock jams, and increases recovery. It can be maneuvered and operated in very shallow water by pivoting up between floats to clear any obstructions. Is easily and quickly assembled with only five wing nuts. Extremely lightweight and is made of molded rugged Marlex Plastic. Stainless steel clamp included.
| Jet Flare Size | Dredge Size | Length | Width | Net Weight | Shipping Weight | Dredge Series | |
| PPJF2 | 2" | 28" | 10" | 2.lbs. | 4 lbs. | 2000 | $75.00 |
| PPJF3 | 3" | 30" | 14" | 6 lbs. | 8 lbs. | 3600/3605 | $135.00 |
| PPJF4 | 4" | 38" | 16" | 8 lbs. | 10 lbs. | 4500/4505 | $145.00 |
| PPJF5 | 5" | 45" | 20" | 15 lbs. | 18 lbs. | 5109 | $170.00 |
| PPJF6 | 6" | 52" | 17" | 42 lbs. | 47 lbs. | 6000 | $200.00 |
| PPJF8 | 8" | 69" | 22" | 72 lbs. | 80 lbs. | 8200 | $375.00 |
| PART NUMBER | SIZE(OD) | COUPLING SIZE | WEIGHT | SHIPPING WEIGHT | MODEL SERIES | |
| PJ2 | 2" | 1 1/4" | 4 lbs. | 6 lbs. | 2000 | $70.00 |
| PJ25 | 2 1/2" | 1 1/2" | 5 lbs. | 7 lbs. | 2500 | $75.00 |
| PJ3 | 3" | 1 1/2" | 8 lbs. | 10 lbs. | 3500 | $90.00 |
| PJ32 | 3" | 2" | 8 lbs. | 10 lbs. | 3500 | $110.00 |
| PJ42 | 4" | 2" | 12 lbs. | 14 lbs. | 4500 | $125.00 |
| PJ43 | 4" | 3" | 16 lbs. | 19 lbs. | 4500 | $137.00 |
| PJ4T2 | 4" | 2X2" | 16 lbs. | 19 lbs. | 4500 | $159.00 |
| PJ5 | 5" | 2" | 15 lbs. | 18 lbs. | 5000 | $155.00 |
| PJ53 | 5" | 3" | 21 lbs. | 25 lbs. | 5000 | $155.00 |
| PJ5T2 | 5" | 2x2" | 22 lbs. | 26 lbs. | 5200 | $175.00 |
| PJ6 | 6" | 3" | 28 lbs. | 32 lbs. | 6000 | $225.00 |
| PJ6T2 | 6" | 2x2" | 30 lbs. | 34 lbs. | 6200 | $250.00 |
| PJ8 | 8.5" | 3x3" | 55 lbs. | 60 lbs. | 8000 | $395.00 |
| Part # | Size | Coupling | Weight | Shipping Weight | |
| SN15 | 1 1/2" | 1" | 2 lbs. | 4 lbs. | $69.00 |
| SN2 | 2" | 1 1/4" | 3 lbs. | 5 lbs. | $75.00 |
| SN25 | 2 1/2" | 1 1/4" | 3.5 lbs. | 6 lbs. | $80.00 |
| SN25T | 2.1/2" | 1 1/4" | 3.5 lbs. | 6 lbs. | $85.00 |
| SN3 | 3" | 1 1/2" | 5 lbs. | 7 lbs. | $89.00 |
| SN32 | 3" | 2" | 5 lbs. | 7 lbs. | $95.00 |
| SN4 | 4" | 1 1/2" | 6 lbs. | 8 lbs. | N/A |
| SN42 | 4" | 2" | 6 lbs. | 8 lbs. | $105.00 |
| SN5 | 5" | 1 1/2" | 8 lbs. | 10 lbs. | $150.00 |
| SN6 | 6" | 1 1/2" | 13 lbs. | 15 lbs. | N/A |
| SN62 | 6" | 2" | 15 lbs. | 17 lbs. | $190.00 |
 |
SUBMERSIBLE DREDGING TUBES SDT Series |
 |
SUBMERSIBLE SUCTION TUBES SS Series |
Body of the Suction Dredging Tube and the Submersible Suction Tube are made of rugged Marlex plastic with removable recovery tray. Suction Nozzle or Power Jet not included.
| PART NUMBER | SIZE | LENGTH | WEIGHT | SHIPPING WEIGHT | |
| SDT5 | 5" | 71" | 21 lbs. | 25 lbs. | $250.00 |
| SDT6 | 6" | 74" | 31 lbs. | 35 lbs. | $275.00 |
| SS5 | 5" | 89" | 21 lbs. | 30 lbs. | $250.00 |
| SS6 | 6" | 122" | 35 lbs. | 40 lbs. | $299.00 |
| SS8 | 8" | 172" | 60 lbs. | 70 lbs. | $595.00 |
| |
|
|