POWER SLUICE CONCENTRATORS
Rather than haul the material to the water you can now bring a lightweight efficient power sluice to the material. The Power sluice can work remote placer deposits hundreds of feet away from the water source. The hopper design washes clay and debris with a high pressure washing spray bar. All washed material is then classified to minus 1/2 inch for selective recovery. The spray bar is equipped with a water valve for controlling the flow in the sluice and a garden hose port that can be used for cleaning cracks and crevices. The sluice has been improved with heavy duty latches, rolled top edges and a better hopper adjustment system. The recovery system has been enhanced with black rubber ribbed matting for quick identification of values, hungarian riffles over miners moss for fine gold recovery and expanded metal over ribbed matting for final separation. Equipped with an adjustable independent leg support system that enables the power sluice to be assembled in any type of terrain in a matter of minutes. SUPER POWER SLUICE
Model 1753 Dredging in shallow river.
MODEL 173 POWER SLUICE CONCENTRATOR
Powered by a 3.5 hp Briggs and Stratton Engine and P103 pump. Equipped with 25 feet of 1 inch pressure hose, FVA15 Foot Valve and hose assembly. Weight 82 lbs. Shipping Weight 102 Ibs.

$1050.00
MODEL 175 POWER SLUICE CONCENTRATOR
Powered by a 5 hp Briggs and Stratton Engine and P-185 pump. Equipped with 50 feet of 1.5 inch pressure hose, FVA-25 Foot Valve and hose assembly. Weight 90 lbs. Shipping Weight 110 lbs.

$1199.00
COMBINATIONS
Keene has combined the popular power sluice and portable dredge to create an efficient gold recovery system that can be used in most any situation. This versatile machine can be equipped with a 2 1/2 or 3 inch suction hose for dredging. The sluice box works extremely well for dredging because the material is pre-classified before entering the sluice box. The combination unit is ideally suited for shallow water areas. The power sluice is easy to set up and requires less water than a standard dredge to operate. The Model 175 series can also be equipped with a T-80 air compressor for diving.
MODEL 1753 POWER SLUICE COMBO 3 INCH DREDGE
Model 175 Dredge Conversion with the addition of a 3inch dredge suction nozzle, 10 feet of 3 inch suction hose and 12 feet of additional pressure hose to accommodate and extend the suction system. Weight 107 Ibs. Shipping Weight 127 lbs.

$1350.00

 
MODEL 175 POWER SLUICE CONCENTRATOR
Powered by a 5 hp Briggs and Stratton Engine and P-185 pump. Equipped with 50 feet of 1.5 inch pressure hose, FVA-25 Foot Valve and hose assembly. Weight 90 lbs. Shipping Weight 110 lbs.

$1199.00
Model 1753 dredging in shallow river. This shows how easy it is to set up in any type of condition.
Floating Dredge & Power Sluice
A Standard "Power Sluice" combination dredge
Model 17530 mounted on a sturdy set of floats. $1725.00

Operate as a floating dredge or bank mount for operation in shallow stream beds. Can also be operated hundreds of feet away from the water source when used as a "power sluice". An optional air compressor system for diving underwater is also available. This is an extremely versatile package, however it should not be considered an alternative to the Ònew jet flareÓ dredge, as it will be heavier, somewhat more bulky and have less suction power, especially when using it as a primary floating dredge.

Model PFA45C Flotation Conversion Kit
Weight 45lbs. Shipping Weight 50lbs. $425.00

Convert a 2 1/2 Sluice Box to a Power Sluice Dredge Combination

PSA Power Sluice Assembly.
This power sluice box is our new 2.5Ó jet flare sluice box with a high banker hopper and legs attached. The new unit is equipped with an improved riffle design and a longer sluice to accommodate a higher capacity engine and and pump. The sluice is equipped with a classifier screen over the black rubber ribbed matting, ribbed carpet, miners moss and wire mesh. The hopper comes bolted to the sluice and the adjustable legs. The feed hopper is equipped with new adjustable grizzly bars section for working in different types of material.
See page 3 for information regarding the 2.5 inch dredge.
Power Sluice Assembly only. Model # PSA $299.00
Power Sluice hoses & P103 3.5 hp Briggs Eng. Model # PSAHB $850.00
Complete 2.5" dredge P103B 3.5 hp Briggs Eng. Model # PSA25D $950.00
Includes: engine pump assembly, 10" x 2.50 suction hose 25' nylo hose nozzle etc.